Guaranteed In Stock
Special Order Item
5-year-warranty
Trade in product
Book a Demonstration
Available to collect immediately
£20,000
| Specification | Details |
|---|---|
| Line Input | 2.7V RMS input for full power at minimum gain |
| Input Impedance | 11 kΩ |
| Speaker Output | 2 × 300W (8Ω) / 2 × 600W (4Ω) |
| THD+N | 0.0028% (1W, 1kHz, 8Ω) |
| IMD | 0.0008% (10W, 8Ω) |
| TIM | 0.002% (10W, 8Ω) |
| Aavik Noise Reduction | 72 Active Tesla Coils |
| 187 Active Square Tesla Coils | |
| 7 Dither Circuitry | |
| 5 Anti Aerial Resonance Coils | |
| Power Consumption | Standby <1W / Idle <30W |
| Input Voltage | 100–240 V |
| Max Current | 10 A |
| Dimensions | 440 × 430 × 117.8 mm (W × D × H) |
| Weight | 20.85 kg |
The Aavik P-x88 power amplifiers are crafted to deliver outstanding musicality and control. Based on the flagship P-880, they combine refined design with exceptional performance. The P-x88 range brings out greater clarity, dynamics, and precision across any audio system. Every note feels more natural, every detail more alive. With the P-x88 at the core, your music unfolds with effortless power and breathtaking realism.
The Aavik P-x88 series is the result of a unique collaboration between two renowned designers. Gryphon Audio’s esteemed founder, Flemming Erik Rasmussen, joined Aavik’s team in 2021, bringing over 35 years of design expertise. Merging his artistic vision with Michael Børresen’s innovative technical approach, they crafted the P-188, P-288, and P-588 amplifiers to not only look stunning but to deliver an exceptional auditory experience.
Aavik P-x88 amplifiers are based on the latest version of Pascal class D amplifier technology, which features even faster UMAC switching modulation and generates less noise. This circuit now requires less filtering and has lower output impedance, which ensures greater control over connected speakers and consistent performance across the entire musical spectrum.
Aavik P-x88 amplifiers feature a fast, low-noise switching power supply, optimised for class D amplification. Operating in power-factor-corrected resonant mode, it delivers smooth, clean sine wave power. When extra power is needed, the supply adjusts its frequency to increase power density, ensuring high peak currents without distortion. The result is a very low noise floor, low output impedance, and superior control over connected speakers.
Impressive noise reduction.
The active square Tesla coils are embedded in our circuit boards – one coil on top and the counter coil on the rear. The principle is the same as the active Tesla coil, and thus, a greater ability to eliminate noise than the passive Tesla coil.
A 3rd generation of the Ansuz analogue dither technology has been developed. Analogue dither technology originated in radar, where it ensured a stronger signal and thus greater range. The active Tesla coils send pulsating signals at precisely defined frequencies. These signals are sent in anti-phase. This significantly amplifies the musical signal and eliminates the background noise floor.
Analysis and studies have led to new options – and a lot of listening has resulted in this 3rd generation design, which is a further optimisation of the most effective frequencies, which opens the soundscape even more and with the tiniest details when it comes to reproduction of the recordings.
Based on Ansuz’s general curiosity about the properties of different materials, Ansuz has implemented a zirconium bar in their anti-air resonance coil design. This is another impressive upgrade to the Ansuz anti-aerial resonance coil technology.
The properties of this zirconium bar allow for unprecedented resonance control, resulting in outstanding musical refinement that creates a natural soundstage, unrivalled in its purity, precision and attention to musical detail.
As a company our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as we can. All delivery charges are included within the prices quoted, unless otherwise specified.
All small items are usually delivered between 9am and 6pm, on a Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind.Not only will your customers receive a one hour delivery timeslot, but they’ll now also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will:
