Stax SRM-D50 Electrostatic Energiser And DAC

Stax SRM-D50 Electrostatic Energiser And DAC

Product code:
SRM-D50
FREE NATIONWIDE DELIVERY
Availability In Stock
Guaranteed In Stock
Free Delivery 1 - 3 Days
2-year-warranty
Trade in product
Book a Demonstration
Available to collect immediately

£1,095

Trade In

Want to Trade In? Get in Touch.

Demonstration

Request a demo for

Stax SRM-D50 Electrostatic Energiser And DAC

Features

  • Electrostatic energiser/DAC for Stax Electrostatic Earspeakers
  • Analogue sources can also be connected
  • ESS ES9018 DAC with TI OPA1642 Op-Amp
  • XMOS USB Interface with DSD128 and 384kHz Support
  • Multiple Digital Inputs: USB, S/PDIF, Optical
  • Analog Input via RCA
  • Discrete Component Amplifier Circuitry
  • A useful VU meter is cleverly housed in the front of the display
  • Standard STAX 5-Pin connector for all STAX headphones

Specifications

Frequency response 20Hz – 40kHz (+/-3dB)
Rated Input Level 130mV r.m.s
Maximum Input Level 30V/ RCA, at minimum volume
Maximum Output Voltage 400V RMS (1130Vp-p)
Gain 59 dB
Harmonic distortion 0.025% or less/1kHz-10kHz /When use with SR-L series
Input Impedance 20kΩ (RCA)
Bias Voltage DC 580V
Digital InputUSB (type B) ×1、TOSLINK Optical ×1、COAX RCA ×1
Analog input RCA ×1
Mains voltage AC 110V / 60Hz
Power Consumption 35W
Operating temperature 0 to 35 degrees (Celsius) (less than 90% humidity, non-condensing)
Dimension 7.55(W) x 2.63(H) x 10.55(D) inches, 192(W)×67(H)×268(D) mm
Weight 9.9 lbs / 4.5 kg

Description

Stax introduced the NEW SRM-D50 electrostatic energiser and DAC

Electrostatic energiser/DAC for Stax Electrostatic Earspeakers

ESS ES9018 DAC coupled with ‘TI OPA1642’ ultra-low distortion op-amp to achieve bit correct signal representation

XMOS USB interface supports DSD128 playback and PCM stream with up to 384KHz sample rate

This high-performance DAC can be connected to a MAC / PC or a variety of digital audio sources

Multiple digital inputs include USB, S/PDIF on RCA and Optical.

Analog input is via RCA Analog sources can also be connected

Amplifier circuitry based on discrete components – heritage from classical

STAX amplifier product A useful VU meter is cleverly housed in the front of the display

Standard STAX 5-Pin connector for all STAX headphones


Multiple input selection

The SRM-D50 features three digital inputs: USB, S/PDIF on RCA and Optical. Analog input is via RCA.

High-resolution playback

On the digital side, the SRM-D50 uses an XMOS USB interface support for DSD 5.6MHz signal playback and PCM audio with up to 384KHz sample rate.

High-End DAC

On the digital conversion side, Stax chose to use the ESS ES9018 DAC. Renowned for its superb sound quality, the ES9018 is then fed to a ‘TI OPA1642’ ultra-low distortion op-amp to ensure the delicate bitstream remains unaltered.


Traditional Stax amplifier circuit

The SRM-D50 features an original low-noise dual FET first stage connecting to an all-stage direct-coupled Class A DC amplifier, which features no coupling capacitors. This allows for the reproduction of the smallest nuances in the music. Improvements to the emitter follower at the output stage result in an extended dynamic range, natural tonality, and inner detail.

Carefully selected components have been chosen not just for their long life and reliability but equally for their tonal quality and unmatched performance.


Exquisitely built

The entire chassis is made from Aluminium reducing the effects of magnetic interference. The SRM-D50 features a one-piece wrap around the lid. This lid goes through several processes to achieve a smooth velvet feel. The Stax logo is engraved on the top of the lid.


The SRM-D50 is a new-generation electrostatic energiser

It allows multiple source selection, including a high-resolution USB audio interface, S/PDIF and optical connection. This is coupled with a traditional analogue connection. Overall the SRM-D50 is a combination of modern aesthetic design, high-quality digital signal processing and the values of traditional Stax craftsmanship.

Additional information

Colour

Silver

Warranty

 

Backed with a 2-year Stax warranty

 

 

 

Delivery Info

dpd-logo

Delivery Information

As a company our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as we can. All delivery charges are included within the prices quoted, unless otherwise specified.

All small items are usually delivered between 9am and 6pm, on a Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind.Not only will your customers receive a one hour delivery timeslot, but they’ll now also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will:

Back to Top

Search For Products

Product has been added to your cart