Guaranteed In Stock
Guaranteed In Stock
Guaranteed In Stock
Guaranteed In Stock
Guaranteed In Stock
Guaranteed In Stock
Guaranteed In Stock
Guaranteed In Stock
Guaranteed In Stock
Guaranteed In Stock
Guaranteed In Stock
Guaranteed In Stock
Store Purchase OnlyStore Purchase OnlyStore Purchase OnlyStore Purchase OnlyStore Purchase OnlyStore Purchase OnlyStore Purchase OnlyStore Purchase OnlyStore Purchase OnlyStore Purchase OnlyStore Purchase OnlyStore Purchase Only
5-year-warranty
Trade in productTrade in productTrade in productTrade in productTrade in productTrade in productTrade in productTrade in productTrade in productTrade in productTrade in productTrade in product
Book a Demonstration
Available to collect immediatelyAvailable to collect immediatelyAvailable to collect immediatelyAvailable to collect immediatelyAvailable to collect immediatelyAvailable to collect immediatelyAvailable to collect immediatelyAvailable to collect immediatelyAvailable to collect immediatelyAvailable to collect immediatelyAvailable to collect immediatelyAvailable to collect immediately£11,950 – £16,650
ATC SCM50ASL (Active) |
|
|---|---|
| Drivers | HF 25mm Mid 75mm LF 234mm Super Linear |
| Amplitude Linearity ±2dB | 70Hz – 20kHz |
| Frequency Response -6dB | 38Hz & 25kHz |
| Matched Response | ±0.5dB |
| Dispersion | ±80° Coherent Horizontal ±10° Coherent Vertical |
| Max Continuous SPL @1m | 112dB SPL |
| Crossover Frequency | 380Hz & 3.5kHz |
| Input Connector | XLR |
| Input Sensitivity | 1V |
| Input Impedance | >10k Ohms Balanced XLR |
| Amplifier Output | HF 50 Watts RMS MF 100 Watts RMS LF 200 Watts RMS |
| Overload Protection | Active FET Momentary Gain Reduction (Amplifiers) |
| Power Requirements | Voltage|| 100, 115, 230 (Factory Set) |
| Frequency | 50/60Hz |
| Power | Nominal 90 Watts, Driven 350 Watts |
| Accessories Inc. (Per Pair) | 2 X Speaker Stands (As Shown), 2 X Fabric Wrapped Grills, 8 X M8 X 1.25mm Stand Spikes And Nuts. |
| Cabinet Dimensions(HxWxD) | 717 X 304 X 480mm / 28.23 X 11.97 X 18.89″ Including Amps (Stands Add 250mm To Height) |
| Weight | 48.9kg |
SCM50SL (Passive) |
|
| Drivers | HF 25mm Mid 75mm LF 234mm Super Linear |
| Amplitude Linearity ±2dB | 70Hz – 20kHz |
| Frequency Response -6dB | 40Hz & 25kHz |
| Matched Response | ±0.5dB |
| Dispersion | ±80° Coherent Horizontal ±10° Coherent Vertical |
| Sensitivity (Sine Wave) | 85dB @ 1W @ 1m |
| Max Continuous SPL @1m | 112dB SPL |
| Crossover Frequency | 380Hz & 3.5kHz |
| Input Connector | Binding Posts/4mm Banana Plugs |
| Recommended Power Amplifier | 100 To 1500 Watts |
| Nominal Impedance | 8 Ohms (5.5 Ohm Minimum) |
| Accessories Inc. (Per Pair) | 2 X Speaker Stands (As Shown), 2 X Fabric Wrapped Grills, 8 X M8 X1.25mm Stand Spikes And Nuts. |
| Cabinet Dimensions(HxWxD) | 717 X 304 X 425mm / 28.23 X 11.97 X 16.73″ (Stands Add 250mm To Height) |
| Weight | 41.1kg |
The SCM50 ASL (active) and SCM50 SL (passive) are designed to perform at their best in the recording studio or at home with the finest quality hi-fi equipment.
The monitors’ ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include the new ATC SH25-76S tweeter and enhanced port profile have brought about further improvements to all performance parameters.
Each drive unit in the active model has its own dedicated and individually matched MOS-FET amplifier, while the 234mm/9″ bass driver incorporates ATC’s unique Super Linear Magnet technology. Our active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion.
Like the HF, mid and bass drivers, all electronics are designed and manufactured in-house to create a no-compromise active system. In passive form, the SCM50 SL provides broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the frequency range.
Speakers are supplied with stands and fabric-wrapped grills.
| Colour | Black Ash (ATC), Cherry (ATC), Oak (ATC), PippyOak (ATC), Rosewood (ATC), Walnut (ATC) |
|---|---|
| Passive/ Active | Active, Passive |
As a company our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as we can. All delivery charges are included within the prices quoted, unless otherwise specified.
All small items are usually delivered between 9am and 6pm, on a Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind.Not only will your customers receive a one hour delivery timeslot, but they’ll now also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will:
