Guaranteed In Stock
Guaranteed In Stock
Free Delivery 1 - 3 DaysFree Delivery 1 - 3 Days
1-year-warranty
Trade in productTrade in product
Book a Demonstration
Available to collect immediatelyAvailable to collect immediately£979
| IHA-8 Product Information | |
|---|---|
| Circuit Design | 4Ch Discrete MOSFET, Pure Class A |
| Special | Hyper Mode |
| Amplifier Modes | Line level input (STD); Pre-Amp input (Pure Power Amplifier mode) |
| Phone Outputs | Single-ended|| 6.35mm x1, Balanced|| 4pin XLR x1, 4.4mm x1 |
| Analog Inputs | Balanced|| XLR x2, Single-ended|| RCA x2 |
| Weight | ~5kg |
| Volume Control | MUSES72320 stereo e-volume x2, ALPS potentiometer (control knob) |
| Power Supply | 75W toroidal transformer |
| Power Management | 50,000uF Nichicon capacitors with ultra-fast recovery rectifier |
| Gain Control | High Gain +12dB, Physical Control |
| Physical Control | Power On/Off, Source, Hyper, Gain, Line/Pre, Volume Knob |
| Dimension | 270x215x70 (mm) (L×W×H) |
Utilizes a four-channel discrete pure Class A input buffer amplification circuit. Incorporating Ti low-noise mono Op- Amp, each channel consists of two Toshiba audio grade JFET connected in parallel with a constant current source.
This design ensures lower noise and lower distortion, as well as a higher current and stronger driving ability.
A pair of Vishay power MOSFET to conduct three-stages large bias current pure Class A amplification.
DC offset voltage servo circuit to maintain a stable output DC offset voltage of OV.
Built-in adaptive power, gain, and quiescent current switching circuits to enhance overall performance and deliver an exceptional listening experience.
Hyper Mode delivers the maximum possible performance of the headphone amplification circuit. To make this happen, we have made further adjustments and improvements to the static operating current and operating voltage in the Class A state
The output power and gain have been increased while preserving the pure Class A state. This refinement brings forth a more pristine and transparent sound, with a well-defined and dynamic soundstage.
Seamlessly connect with CD players, desktop decoders, portable players, and other audio sources with Line-level output using XLR or RCA connectors.
Three different outputs cover popular headphone options in the market Free to use any headphone according to your mood and preference, with the peace of mind that your amplifier will always handle your headphones satisfactorily.
A monolithic Protector IC safeguards the amplifier by performing output DC detection, power-on delay squelch, power-off noise cancellation, and overcurrent/overload protection. Protect the power amplifier circuit and headphones from power-on to power-off, and every step in between.
Carefully selected premium components are a compliment to cutting-edge engineering
The headphone amplifier circuit is powered by a four-channel high-dynamic high-current discrete linear voltage stabilizing circuit. The voltage amplification and HeadAmp output stage are independently powered.
A secondary enhanced voltage stabilizing circuit is specially designed for the JFET input buffer amplifier circuit, volume controller, and other audio circuits.
The volume control circuit features an ALPS customized step potentiometer combined with a pair of high-end 130-step electronic volume chips JRC MUSES72320V.
While the volume is controlled electronically, the volume is adjusted purely in the analogue domain. This meticulous design enables a delicate feel and ensures stable and highly precise volume control.
The left and right side panels are designed as ridged heat sinks.
The extra surface area enhances heat exchanges and improves heat dissipation capacity.
The optimized operation condition allows the DAC to deliver its best performance.
Featuring an L-shaped aluminium cover plate, precision mould extrusion, CNC precision machining, fine sandblasting, and anodized surface treatment, the amplifier has a uniform and delicate texture, making it durable over time.
| Colour | Black, Silver |
|---|
As a company our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as we can. All delivery charges are included within the prices quoted, unless otherwise specified.
All small items are usually delivered between 9am and 6pm, on a Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind.Not only will your customers receive a one hour delivery timeslot, but they’ll now also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will:
