Guaranteed In Stock
Free Next Day Delivery
1-year-warranty
Trade in product
Book a Demonstration
Available to collect immediately
£289
|
FT3 Basic specifications |
|
| Headphone type | Dynamic driver headphones |
| Frequency response | 7Hz-40kHz |
| Driver type | 60mm dynamic driver |
| Diaphragm material | Beryllium-plated gasket + DLC diaphragm |
| Impedance | 350 Sensitivity:1050B (1Vrms)@1kHz |
| Weight | About 391g (excluding cable) |
| Earpad pressure | 4.ON±0.3N |
| Cable length | About 3m |
| Cable material | Furukawa monocrystalline copper wire |
| Headphone connector | Dual 3.5mm |
|
Accessories |
|
| Interchangeable plug | 3.5mm |
| Interchangeable plug | 4.4mm |
| Adapter | 3.5mm female to 6.35mm male adapter |
| balanced adapter | 4.4mm female to XLR-4 male balanced adapter |
| Case | Leather storage case |
| Earpads | Protein leather earpads |
| Earpads | Suede earpads |
| Cables | Headphone cable |
The FT3’s large dynamic driver also has other benefits. For example, due to its large size, the diaphragm can bear higher output power, leading to less distortion under large dynamic signals. Also, the larger driver can more easily produce lower frequencies for deeper-reaching bass.
The diaphragm is one of the most important parts of a dynamic driver. And not just any diaphragm material can meet the demands of the FT3 due to the large driver size. After countless tests at FiO, a beryllium-plated gasket + DLC diaphragm was chosen.
The FT3 driver gasket is plated with beryllium. This not only results in a lighter gasket (and thus a lighter driver) but also a more rigid gasket better able to handle the movement of the large dynamic driver for less distortion.
The diaphragm of the FT3 is made of DLC (Diamond-Like Carbon), – which is both highly sturdy and lightweight compared to other diaphragm materials This means that the FT driver is less prone to breakup and, thus, nonlinear distortion. It also has an extremely extended frequency response and improved soundstage.
The FT3 was designed with great sound as the primary goal, and features 3500 impedance to achieve that. Compared to lower-impedance headphones, higher-impedance headphones more effectively filter out noise to the listener resulting in a purer sound with higher signal-to-noise ratio performance The voice coil is made of ultra-fine Japanese copper-clad aluminum only 0.035mm thick in diameter. This finer voice coil allows the driver to better and more quickly follow signals, has anti-interference capabilities, and allows for thunderous dynamics across a wide frequency response range.
The FT3 utilizes powerful N52 neodymium magnets to maximize sound quality under its 3500 impedance design. These magnets have been arranged in an optimized asymmetrical internal and external magnetic circuit system. When the voice coil starts to move during the reproduction of sound, the optimized magnetic circuit balances this movement of the voice coil and diaphragm, especially during large dynamic changes – which allows more effective use of magnetic
energy and better control over the voice coil.
The exterior of the FT3 is made entirely of aluminium alloy that not only feels luxurious to the touch but is also highly rigid yet lightweight. This gives the FT the perfect combination of being comfortable to listen to and being durable enough to withstand life’s challenges.
The FT3’s design begins with hexagonal elements as its base, and when combined with how open-backed headphones
usually look, gives off a bold sci-fi appearance. The open-back design features a hollowed-out mesh to not only further reduce
the weight for greater listening comfort, but also to fully unleash the capabilities of its driver in a more open environment.
The FT cable features swappable plugs of the following 4 kinds:
3.5mm to 6.35mm adapter
4.4mm to XLR-4 balanced adapter
*
The patent for a replaceable audio plug is
Furukawa monocrystalline copper wire Standard with the FT3 is a 3m, 23AWG diameter cable consisting of high-purity Furukawa monocrystalline copper wire.
“The cable model is HPC-23T, which is OYAIDE’s original cable manufactured by Furukawa. In 2013 when it was announced to be discontinued, we placed a large order and stored them properly. Until now, a number of them were used as our headphone cables, so the stock is limited, and there are only 5000 pieces left for the FT3. After it is out of stock, the FT will be featured with other monocrystalline copper cables from other manufacturers. To avoid unnecessary misunderstandings when changing the cable in the Outer shell material: Flame-retardant shockproof nylon braided strap
Wire cover material: TPE
Shielding layer: PCOCC-A (26/0.12X2)
Insulating layer: PFA Conductor: PCOCC-A (3/20/0.08X2AWG23)
Cable outermost diameter: Main cable 6.5mm, branch cable of each side 3.5mm
The FT3 features an open-backed design that reduces unwanted vibrations and resonances and results in
a larger soundstage, since when the driver is pushing air in the housing the open-back means that air
encounters. The result is that details in the music come through more clearly and naturally in a wide open
soundstage, just as if you were listening to a live performance.
The FT3 has undergone much-fit testing in Fio Labs, and the 3-axis swivelling design is one result of
that testing. The 3-axis swivelling design was specifically made so that the FT could better fit a wide
variety of head and face shapes for improved comfort and better seal to maximize sound quality.
The FT3 comes with 2 sets of earpads, each with their sound
Suede earpads: Balanced sound, enhanced ambience, majestic experience
Protein leather earpads Clear sound, large soundstage, highly detailed
| Colour | Black |
|---|
As a company our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as we can. All delivery charges are included within the prices quoted, unless otherwise specified.
All small items are usually delivered between 9am and 6pm, on a Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind.Not only will your customers receive a one hour delivery timeslot, but they’ll now also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will:
