Hifonix offers one of the best headphone experiences in the UK
Thinking of upgrading? Trade in your product. Call us for more information.
For sales & support please call 0121-382-5444
We use DPD for all deliveries. Buy with confidence
Order before 3 pm for free next working day delivery on most items
We are Open from Monday to Saturday 10 am - 6 pm
D16 is a portable discrete DAC/amp that showcases iBasso’s excellent digital and analog design expertise. The D16 utilizes an in-house developed FPGA-Master2.0 chip as its core, and employs 16 sets of cascaded 8E PWM-DACs, with a total of 128 PWM-DACs (discrete) for 1bit D/A conversion. The measured THD+N is lower than 0.0001%, which is the best among current portable discrete DACs.
The AMP section is the super class A transistor amplifier that is very similar to the DX320 MAX amplifier, delivering up to 1125mW of clean power to your high end headphones.
Discrete PWM-DAC
After the FPGA generates the PWM signal, it arrives at the discrete PWM-DAC for decoding. The 16 sets of an 8E PWM-DAC cascade are employed. There are 4 sets per L+, L-, R+, and R-, which is 32 PWM-DACs. The quantity of DACs exceeds that of other portable discrete DACs by more than 6.4 times.
With the exceptional combination of precise decoding and a substantial quantity of extremely high-quality DACs a THD+N level of less than 0.0001% is achieved and represents an excellent performance.
Hardware Analog FIR Filter
With FPGA-Master2.0’s picosecond-level precise control, 128 independent PWM-DACs operate in FIR mode and combine to form L+, L-, R+, R- outputs. Each channel has 32 PWM-DACS operating in “delay parallel” mode. This configuration enables the 32 DACs to work together as a hardware analog FIR filter. By averaging the differences between multiple DACs, distortion is minimized, resulting in enhanced sound detail and density.
Super Class A Discrete Amplifier
The D16 utilizes a similar architecture to the DX320MAX, a super Class A discrete AMP circuit. It incorporates 20 pcs of Low VCEsat (BISS) dual transistors and boasts an impressive output current capability of up to 2A, resulting in a robust output of 1125mW+1125mW@320.
FPGA-Master 2.0
D16’s FPGA-Master2.0 brings together iBasso’s algorithm achievements from the past three years and is the reason they have been able to accomplish breakthroughs for the D16s portable discrete DAC.
The FPGA chip plays the role of signal reorganization and recoding, which generates PWM signals that can be decoded by the subsequent PWM-DAC.
DAC developers are well aware that when the THD reaches a certain level, the presence of noise becomes a hindrance to achieving a greater dynamic range. The D16’s FPGA-Master2.0 boasts an impressive noise shaper that radically lowers the noise floor.
Global clock regeneration technology is employed. Two Accusilicon femtosecond oscillators provide a clock reference for the FPGA. The FPGA regenerates the synchronous low-phase noise clock required by the DSP and USB receiver. 1-bit DACs are very sensitive to clock jitter. iBasso tested a variety of femtosecond oscillators of various brands, and Accusilicon’s audio oscillator has a phase noise as low as -158dBc/Hz [@1kHz]. Compared with the – 145dBc/Hz of a general femtosecond oscillator, the phase noise is reduced by 13dB, which guarantees excellent Jitter control for the D16.
The FPGA in the D16 delivers picosecond-level precise delay control, which can set the 1/0 delay and compensate for the “wiring delay” of the board so that the signals arriving at the DAC end are aligned and strictly synchronized.
With the precise control of FPGA-Master 2.0, 128 independent PWM-DACs operate in FIR mode and combine to form L+, L-, and R+ outputs. Every DAC data bit undergoes careful delay and alignment through rigorous compensation.
Additional information
Colour
Black, Silver
Warranty
Backed with 1-year of Manufacturer Warranty
Delivery Info
Delivery Information
As a company, our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as possible. All delivery charges are included within the prices quoted unless otherwise specified.
All small items are usually delivered between 9 am and 6 pm, Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind. Not only will your customers receive a one-hour delivery timeslot, but they’ll also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will:
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok