Features
- 2.5W + 2.5W power output
- AK4499EQ DAC chip
- Multi-layer PCB circuit design
- Independent power supply
- 3mm thick shield
- 97Wh battery (6x “21700” cells)
- Compatible with 99.99% of headphones
- Portable design
£5,899
General Specifications | |
Formats | DSD 64/128/256/512 DFF/DSF/ISO || WAV/MP3/FLAC/APE/OGG/MA/AAC |
Top Screen | 800×480 4-inch touch screen |
Front Screen | 480×360 2.2-inch LCD |
Line Output | XL (Balanced) /RCA (Unbalanced) |
Battery Pack | 10.8V / 9000mAh (97.2Wh) Li-jon |
Lotoo Wireless Audio | LTTP (Lotoo Tele-Transport Protocol) |
Size | 18×18×6.3cm(Excluding protrusions) |
USB Ports | Type-C OTG (USB Storage/DAC) × 1 || Type-C PD (Recharge) x 1 || Type-A USB Host (USB Ext. Storage) x 1 |
Headphone Ports | 3.5mm / 6.35mm (Unbalanced) || 4.4mm / 4pin XLR (Balanced) |
wi-Fi | Supported |
Firmware Update | Supported |
Weight | About2700g |
Sample Rate | DSD up to DSD51% || PCM up to 768KH2 |
Processor | NXP iMXN6LL || ADI Blackfin BF701 || Ingenic X1000 |
Bluetooth Audio | SBC, AAC, LDAC |
DAC Chip | AK4499EQ x 1 |
HeadphoneAmplifier | LME49600 x 8 |
Charger | PD3.0 20V 3A |
Digital Output | XLR (AES/EBU) || RCA (SPDIF) || Optical (SPDIF) |
Digital Input | XLR (AES/EBU) || RCA (SPDIF) || Optical (SPDIF) |
Storage | UHS-II SD 4.0 || Max 2TB Capacity || Max speed 300M/s |
Streaming | DLNA |
Audio Headphone 3.5 mm/6.35mm | |
Maximum Output Power | 1.2 W @ 32 ohm |
Frequency Response | +-0.03 dB (20-20KHz) |
SNR | 130 dB |
THD+N | 0.0004% |
Channel Isolation | 122 dB |
Dynamic Range | 131 dB |
Minimum Noise Level | 119dBu |
Audio Headphone 4.4 mm/4pin XLR | |
Maximum Output Power | 2.5 W @ 32 ohm |
Frequency Response | +-0.01 dB (20-20KHz) |
SNR | 130 dB |
THD+N | 0.0004% |
Channel Isolation | 123 dB |
Dynamic Range | 134 dB |
Minimum Noise Level | 119dBu |
Audio Line out RCA | |
Maximum Level | +18 Bu |
Frequency Response | +-0.01 dB (20-20KHz) |
SNR | 130 dB |
THD+N | 0.0004% |
Channel Isolation | 124 dB |
Dynamic Range | 130 dB |
Minimum Noise Level | 121dBu |
Audio Line out XLR | |
Maximum Level | +24 dBu |
Frequency Response | +-0.01 dB (20-20KHz) |
SNR | 132 dB |
THD+N | 0.0003% |
Channel Isolation | 130 dB |
Dynamic Range | 134 dB |
Minimum Noise Level | 120dBu |
Digital out AES/EBU Coaxial Optical | |
Sample Rate | 44.1 KHz / 88.2KHz / 176.4KHZ || 48KHz / 96KHZ / 192KHZ |
We are pleased to announce the long-awaited launch of Mjölnir, a groundbreaking all-in-one desktop audio system that combines hi-fi audio capabilities with unmatched versatility.
Inspired by the legendary hammer of Thor from Norse mythology, Mjölnir embodies a compact yet powerful audio solution that delivers exceptional performance and takes the audio experience to new heights.
With Mjölnir, Lotoo takes the leap from our portable DAPs into the world of desktop audio. Mjolnir. This state-of-the-art hybrid device elegantly combines sophistication and portability in a sleek all-metal design, offering audiophiles a unique audio experience.
Mjölnir represents the culmination of Lotoo’s two decades of dedicated audio research and development. Developed by a team of passionate experts, this all-in-one audio system sets new standards for uncompromising sound quality without sacrificing portability.
With Mjolnir, audio enthusiasts can enjoy an extraordinary listening experience that defies all conventions. Whether at home or on the go, Mjölnir is ready to deliver unparalleled sound, making it the best choice for discerning music lovers looking for a powerful audio companion.
Our pursuit goes beyond making exceptional audio devices; it is a relentless pursuit of perfection aimed at delivering faithful sound reproduction without distortion or colouration in every music and recording playback.
We honor the artistry of music and the deep connection it creates between the listener and the artist. Through our humble efforts, we aim to capture the true essence of each note, allowing listeners to immerse themselves in the beauty and depth of sound as it was intended.
In its compact design, Mjölnir achieves a signal-to-noise ratio of 132 dB, a noise floor of less than 0.8 μV rms and a dynamic range of 134 dB with an output power of 2.5 W (per channel).
Mjolnir features a fully separate multi-layer PCB construction, multi-processor architecture, independent power supply and independent 3mm thick shielding. It unleashes the full potential of the AK4499EQ to its full potential.
The 97Wh of energy from six “21700” cells ensures a continuous and stable power supply of 20V 3A internally. Playback time ranges from 8 to 15 hours (depending on gain, screen operation @on, headphone impedance and other specific conditions).
It offers effortless control for high-sensitivity earphones and high-impedance headphones. It offers unbalanced 3.5mm, balanced 4.4mm, unbalanced 6.35mm and balanced 4-pin XLR connectors for a wide range of audio devices and ensures compatibility with various headphone options.
To meet different user scenarios, Mjölnir is accompanied by a custom-made genuine leather carrying case, which makes it easy to carry and store.
It also supports Wi-Fi streaming for Roon (currently in the certification phase), two-way Bluetooth connection, digital input for desktop devices, USB connection for computers and phones, digital output for AV amplifiers, digital output for DACs, Balanced/unbalanced analogue output for active loudspeakers and output for amplifiers.
Tri-axis toggle switch provides a better tactile feel and user experience and reduces blind operation errors. The precise adjustment knob ensures a clear selection of the output channels with distinct feedback. The volume control offers effortless operation and improved control options.
Each Mjölnir bolt is individually machined and manufactured from 304 and 316 stainless steel for strength, reliability, and consistency.
The high-quality, CNC-machined, all-metal support structure cleverly combines several components and features a reliable, fully enclosed, interlocking design that provides vibration-damping support for the circuit system and perfect heat dissipation on both sides. Mjölnir embodies the highest quality standards of Lotoo Standards.
Colour | Titanium |
---|
As a company our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as we can. All delivery charges are included within the prices quoted, unless otherwise specified.
All small items are usually delivered between 9am and 6pm, on a Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind.Not only will your customers receive a one hour delivery timeslot, but they’ll now also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will: