Guaranteed In Stock
Free Delivery 2 - 4 Days
1-year-warranty
Trade in product
Book a Demonstration
Available to collect immediately
£2,999
| Basic parameters | |
| Model | P6 PRO |
| Appearance | size/weight 124×67.3x20mm/224g |
| Display | .5 inches, IPS capacitive touch screen, resolution 480×320 |
| Body material | aviation aluminum |
| Rosewood back cover | |
| Main control | 1812C |
| DAC | fully discrete R2R decoding |
| Crystal oscillator ultra-low phase noise-160db active crystal oscillator | |
| Op amp EXCELS V-O | |
| Headphone amplifier EXCELS EP-AS | |
| Inductor Low internal resistance high current metal alloy inductor | |
| Button | ALPS |
| Capacity | 64GB 24 BIT ECC FLASH |
| Support expansion capacity 1TB micro SD card (TF) | |
| Charger specifications | DC voltage input range is 4.8-5.5v. The maximum output current of the power adapter is recommended to be an adapter of 2A or above (compatible with fast charging heads) |
| Battery | capacity/type 4000mA/H lithium battery |
| Setting parameters | |
| Adapted headphone impedance | 8-300ohm |
| EQ adjustment | 0 style adjustments |
| HP output 2-level gain adjustment | |
| Track SPDIF | support |
| Digital filter settings | 6 filter modes (including NOS) |
| Output phase setting | 0 degrees/180 degrees |
| USB connection mode | MSC mode/Audio mode |
| USB DAC | support |
| USB Audio delay setting | Long delay mode/short delay mode |
| DSD decoding settings | Native dsd mode/DSD to PCM mode (in order to adapt to decoders that only support D2P) |
| 3.5mm single-ended line output performance parameters | |
| Signal-to-noise ratio | (A Weighting) >125db(A Weighting) Dynamic range >121db (A Weighting) |
| Distortion plus noise | < 0.003% |
| Frequency response | 20Hz-20KHz +/- 0.8db |
| Channel separation | ≥98db 10K load |
| Single-ended line output level | 2.45Vrms/1.55Vrms/switchable design |
| 4.4mm balanced line output performance parameters | |
| Signal-to-noise ratio | ≥125.5db (A Weighting) |
| Dynamic range | >121.5db (A Weighting) |
| Distortion plus noise | < 0.003% |
| Frequency response | 20Hz-20KHz +/- 0.8db |
| Channel separation | 115db 10K load |
| Balanced line output level | 4.9Vrms/3.1Vrms/switchable design |
| Some performance parameters of P6 PRO headphone output (3.5mm single-ended output) | |
| Maximum output power | @160 330mW (continuous load power) |
| Maximum output power | @320 180mW (continuous load power) |
| Maximum output power | @3000 20mW (continuous load power) |
| Signal-to-noise ratio | ≥ 125db (A Weighting) |
| Dynamic range | >121db (A Weighting) |
| Distortion plus noise | < 0.003% @320 load |
| Frequency response | 20Hz-20KHz +/- 0.8db |
| Output impedance | 0.2 ohm |
| Channel separation | > 75db @320 load |
| Output voltage | (maximum volume) High gain 2.45Vrms Low gain 1.55Vrms |
| Bluetooth technical specifications | |
| Bluetooth version | 5.0 |
| Supported protocols | LDAC, APTX, APTXHD, APTXLL, AAC, SBC |
| Transmission direction | Bluetooth of P6 PRO is the receiving end |
| Transmission distance within 15 meters in open space without obstruction | |
| The Bluetooth audio clock source is a precise clock generated by the FPGA as the clock source | |
The highest listening discrete R2R portable player.
Lebi’s carefully selected matching technology, which has been cultivated for many years, uses the resistors in the P6 series of products to select the best products.
Equivalent to the performance of two P6 circuit boards connected in parallel, without doubling the output voltage. Classical music sounds more exciting, and musical instruments have better dynamic expression.
It reaches or exceeds the standard of most flagship machines using SD DAC, allowing more music details to be revealed.
.
Hyperactive iron high-sensitivity earplugs are a better companion, preventing any noise from interfering with the pleasure of appreciation.
Better accuracy, better operating experience, lower power consumption, and stronger anti-interference ability.
.
To match the higher DAC dynamics, the relevant components are carefully selected.
It only requires a very low CPU frequency to run, reducing interference to analog circuits.
Lower power consumption supplies more power to analog circuits.
The unique LLMVS volume system ensures no loss of dynamics even at the lowest volume.
Better Bluetooth audio algorithm and more accurate use of FPGA clock source.
.
| Colour | Grey |
|---|
As a company our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as we can. All delivery charges are included within the prices quoted, unless otherwise specified.
All small items are usually delivered between 9am and 6pm, on a Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind.Not only will your customers receive a one hour delivery timeslot, but they’ll now also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will:
