Lyra Kleos Moving Coil Cartridge

Lyra Kleos Moving Coil Cartridge

Product code:
Kleos
Available For Demonstration In Store
Product codeN/A
Availability In Stock
Guaranteed In Stock
Free Delivery 7 - 14 Days
1-year-warranty
Trade in product
Book a Demonstration
Available to collect immediately

£2,895

Trade In

Want to Trade In? Get in Touch.

Demonstration

Request a demo for

Lyra Kleos Moving Coil Cartridge

Features

  • High-quality pivoted or linear tangential) tonearms with rigid bearing(s), adjustable anti-skating force, preferably VTA
  • One-piece machining from solid 7075 alloy billet, with reduced-surface higher-pressure headshell contact area, partially non-parallel shaping, phase-interference resonance-controlling mechanism, and body threaded directly for mounting screws
  • Medium weight, medium compliance, low-impedance moving coil cartridge
  • Lyra-designed long-footprint variable-radius line-contact nude diamond (3um x 70um), slot-mounted

Specifications

Designer:Jonathan Carr

Builder:Yoshinori Mishima (final build, testing), Akiko Ishiyama (preliminary build)

Type:Medium weight, medium compliance, low-impedance moving coil cartridge

Stylus:Lyra-designed long-footprint variable-radius line-contact nude diamond (3um x 70um), slot-mounted

Cantilever system:Solid boron rod with short one-point wire suspension, directly mounted into cartridge body

Coils:2-layer deep, 6N high-purity copper, square-shaped chemically-purified high-purity iron former, 5.4ohm self-impedance, 9.0uH inductance

Output voltage:0.5mV@5cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)

Frequency range:10Hz ~ 50kHz

Channel separation:35dB or better at 1kHz

Compliance:Approx. 12×10-6cm/dyne at 100Hz

Vertical tracking angle:20 degrees

Cartridge body:One-piece machining from solid 7075 alloy billet, with reduced-surface higher-pressure headshell contact area, partially non-parallel shaping, phase-interference resonance-controlling mechanism, and body threaded directly for mounting screws

Cartridge mounting screws:2.6mm 0.45 pitch JIS standard

Distance from mounting holes to stylus tip:9.5mm

Cartridge weight (without stylus cover):8.8g

Recommended tracking force:1.65 ~ 1.75g (1.72g recommended)

Recommended load directly into MC phono input:95.3ohm ~ 816ohm (determine by listening, or follow detailed guidelines in user manual)

Recommended load via step-up transformer:5 ~ 15ohm (step-up transformer’s output must be connected to 10kohm ~ 47kohm MM-level RIAA input, preferably via short, low-capacitance cable)

Recommended tonearms:High-quality pivoted or linear tangential) tonearms with rigid bearing(s), adjustable anti-skating force, preferably VTA

Description

LYRA KLEOS (Currently shipping “New Angle” stereo model)

The New Angle on LP Reproduction:

The Lyra Kleos MC Phono Cartridge

Although many MC cartridges have good performance, their sound is held back by how they are designed. The problem is, the signal coils should have the same angle as the magnetic circuit during playback, but MC cartridges are typically designed so that the opposite happens – applying normal tracking force pushes the coils out of alignment. This impairs coil sensitivity and linearity, and reduces sound quality.

Lyra’s “New Angle” technology solves this fundamental problem by compensating for how the signal coils are affected by vertical tracking forces, and optimally aligning the coils when it matters most – during playback. Introduced on our entry-level Delos, the New Angle technology enables the Delos to perform well above its pricepoint.

But being audiophiles, we wanted to achieve the next higher level – which is the new Kleos. Building on New Angle technology, the Kleos innovates with a stronger chassis machined from aircraft-grade alloys, narrowed mounting area to improve energy transfer, and pre-stressed construction combining multiple materials with non-parallel surfaces to inhibit internal body resonances. The fully hand-made Kleos also has a Lyra-designed line contact stylus and platinum-plated output pins, achieving an exceptionally quiet noise-floor with superior immediacy, resolution and tracking, wide dynamic range and explosive transients, plus a warmer and natural tonal balance. The Kleos is a high-value cartridge that surpasses the sound quality of substantially more expensive cartridges.

Let the Lyra Kleos show you how good a New Angle on LP reproduction can sound.

                       

KLEOS

The Kleos is the lowest cost Lyra cartridge to feature the full fledged Ogura manufactured boron cantilever and coil system with Lyra original line-contact (3 x 70μm) stylus. This is similar to what is employed on even the most expensive Lyra models.

Nevertheless, the most important element of the new Kleos is it’s sound. We firmly believe that the Kleos is capable of extracting more information from the vinyl grooves than it’s predecessors, and that the reproduction of music is both more dynamic, more detailed, and more natural than the models preceding it. We also are of the opinion that the Kleos will set a new standard for sonic performance at it’s price point.

Today there are only a small handful of master cartridge builders in the world, and Lyra’s Yoshinori Mishima belongs to this elite group of individuals that are capable of crafting the highest level MC transducers on the planet. His assistant Akiko Ishiyama, who has undergone several years of apprenticeship, is also involved in the building process leading to each Kleos. The Kleos is not only hand made, but each cartridge is listened to extensively and “voiced” by the master cartridge builder, like the finest musical instruments.

Lyra offers a unique combination of capable, advanced cartridge design by Jonathan Carr and complete handmade execution by the above mentioned individuals. Investing in a Lyra Kleos through an authorized retailer will offer you an unparallelled analog experience from your stereo microgroove vinyl records.

Additional information

Colour

White

Warranty

Backed with a 1-year Lyra warranty

Delivery Info

dpd-logo

Delivery Information

As a company our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as we can. All delivery charges are included within the prices quoted, unless otherwise specified.

All small items are usually delivered between 9am and 6pm, on a Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind.Not only will your customers receive a one hour delivery timeslot, but they’ll now also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will:

Back to Top

Search For Products

Product has been added to your cart