Guaranteed In Stock
Guaranteed In Stock
Free delivery 1 - 3 daysFree delivery 1 - 3 days
1-year-warranty
Trade in productTrade in product
Book a Demonstration
Available to collect immediatelyAvailable to collect immediately£299
| DAC | Dual Cirrus Logic CS43198 |
| PCM | Up to 32bit/768kHz |
| DSD | Native DSD 512x |
| Weight | 1.7 oz |
| Dimensions | 2.6″ x 1.4″ x 0.6″ |
| 4.4mm BAL Output (AB Mode) | |
| THD+N | -119dB (0.00011%) @1kHz 200kΩ |
| Output Voltage | 2.8Vrms (Low Gain) |
| 4.1Vrms (High Gain) | |
| Output Power | 450mW@32Ω |
| S/N | 130dB |
| Dynamic Range | 130dB |
| Crosstalk | 145dB |
| Frequency Response | 15Hz-40kHz ±0.5dB |
| 4.4mm BAL Output (TUBE Mode) | |
| Output Voltage | 2.3Vrms (Low Gain) |
| 4.5Vrms (High Gain) | |
| Output Power | 525mW@32Ω |
| S/N | Â 107dB |
| Dynamic Range | 110dB |
| Crosstalk | Â 82dB |
| Frequency Response | 15Hz-40kHz ±1dB |
| 3.5mm SE Output (AB Mode) | |
| THD+N
|
-115dB (0.00017%) @1kHz
600kΩ |
| Output Voltage | 1.4Vrms (Low Gain) |
| 2Vrms (High Gain) | |
| Output Power | 125mW@32Ω |
| S/N | 125dB |
| Dynamic Range | 125dB |
| Crosstalk | 116dB |
| Frequency Response | 15Hz-40kHz ±0.5dB |
| 3.5mm SE Output (TUBE Mode) | |
| Output Voltage | 1.15Vrms (Low Gain) |
| 2.25Vrms (High Gain) | |
| Output Power | 150mW@32Ω |
| S/N | 112dB |
| Dynamic Range | 112dB |
| Crosstalk | 82dB |
| Frequency Response | 15Hz-40kHz ±1dB |
| In the Box | Nunchaku DAC |
| Protective case | |
| USB-C to C cable | |
| USB-C to Lightning cable | |
| USB-A adapter | |
The iBasso Nunchaku is a balanced portable DAC and headphone amplifier based on two CS43198 chips coupled to an FPGA to handle signal conversion up to 32bit PCM and DSD512. As for the amplification stage, you can choose between operation using power tubes for a warm sound or a more traditional Class AB operation for a more neutral sound with improved dynamics. The Nunchaku has an output power of 2x525mW at 32Ω, which is more than enough to drive any earphones and most headphones on the market.
The Nunchaku uses two Raytheon JAN6418 power tubes, renowned for their compact size, low power consumption and operating stability. Unlike most portable products that use 9V or 12V power supplies, the Nunchaku uses a 22.5V anode power supply specially designed for the JAN6418 tubes. This higher voltage provides furthermore flexibility, ensuring that the tubes operate at their full potential. The two JAN6418 tubes give the Nunchaku a distinctive analogue sound, with a warm, relaxed and smooth tone that’s a pleasure to listen to.
Furthermore, in addition to the TUBE output mode, the Nunchaku also features a Class AB amplifier circuit, allowing users to switch between these two output modes to enjoy two distinct sound profiles. In TUBE mode, the sound is soft and warm, with the characteristic timbre of this technology. Class AB mode, on the other hand, offers a more neutral tone as well as greater resolution and improved dynamics.
The Nunchaku’s conversion stage is no slouch either, using two top-of-the-range CS43198 chips from Cirrus Logic, which, when coupled with the FPGA developed in-house by iBasso, enable conversion of a signal up to 32bit 768kHz PCM and DSD512, all in a symmetrical architecture.
Furthermore, the Nunchaku is equipped with a Femtosecond clock developed by iBasso, guaranteeing perfect signal synchronisation.
The Nunchaku’s TUBE mode also incorporates a hardware JRC volume control, allowing the DACs to operate at their maximum output levels in order to give the tubes the most powerful signal possible to amplify. It is this amplified signal that is then lowered, reducing the background noise at the same time, resulting in a drastic improvement in the signal-to-noise ratio (SNR).
In order to greatly reduce the impact that movements of the device could have on sound reproduction in TUBE mode, iBasso has fitted the Nunchaku with a suspension based on PORON material, which effectively absorbs shocks. The tubes protected in this way are much less sensitive to movement and shocks, ensuring quality reproduction, even when you’re on the move.
| Colour | Red, Silver |
|---|
As a company, our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as possible. All delivery charges are included within the prices quoted unless otherwise specified.
All small items are usually delivered between 9 am and 6 pm, Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind. Not only will your customers receive a one-hour delivery timeslot, but they’ll also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will:
