Features
- 200 Watts x 2 channel
- 5-band tone control
- Comes with DA2 Digital Audio Module (installed)
- 55% increase in Dynamic H.
McIntosh MA8950 2-Channel Integrated Amplifier
McIntosh MA8950 2-Channel Integrated Amplifier
Demonstration available upon request
Guaranteed In Stock
Store Purchase Only
3-year-warranty
Trade in product
Book a Demonstration
Available to collect immediately
£12,495
Specifications
|
ELECTRONIC SPECIFICATIONS |
|
| Power Output per Channel | 200 Watts |
| Number of Channels | 2 |
| Speaker Impedance | 2, 4, or 8 Ohms |
| Rated Power Band | (20Hz to 20kHz) |
| Total Harmonic Distortion | 0.005% |
| Dynamic Headroom | 3.1dB |
| Frequency Response +0,-0.5dB | 20Hz to 20kHz |
| Frequency Response, +0, -3dB | 10Hz to 100kHz |
| Sensitivity Phono (Moving Coil) | 0.25mV |
| Sensitivity Phono (Moving Magnet) | 2.5mV |
| Sensitivity High Level (Balanced / Unbalanced) | 0.5V/0.25V |
| Sensitivity (Power Amp input) | 1.4V |
| Signal To Noise Ratio (Moving Coil) | 80dB |
| Signal To Noise Ratio (Moving Magnet) | (82dB) |
| Signal To Noise Ratio (High Level) | 95dB |
| Signal To Noise Ratio (Power Amp input) | 113dB |
| Input Impedance (Balanced / Unbalanced) | 20K/20K |
| Damping Factor | >40 |
| Maximum Output (Balanced / Unbalanced) | 8V Unbalanced |
|
CONNECTIVITY |
|
| Balanced Input | 1 |
| Unbalanced Input | 6 |
| Phono Input Moving Coil | 1 (adjustable loading) |
| Phono Input Moving Magnet | 1 fixed loading |
| Upgradeable Digital Audio Module | Yes: DA2 |
| Headphone Output | 1/4″ High Drive with Headphone Crossfeed Director (HXD®) |
| Subwoofer Output | 0 |
| AM/FM Tuner option | No |
| Home Theater PassThru | Yes |
| Unbalanced Analog Connector Type | Standard |
| Speaker Binding Post Type | Standard |
| Service Port | 1 |
|
DIGITAL AUDIO SPECIFICATIONS |
|
| Digital-to-Analog Converter (DAC) Type | 8-channel, 32-bit/384kHz PCM/DSD, Quad Balanced |
| Digital Coaxial Input Sample Rate | 24-bit/44.1kHz to192kHz |
| Digital Optical Input Sample Rate | 24-bit/44.1kHz to192kHz |
| Digital MCT Input Sample Rate | 16-bit/44.1kHz (CD) ||DSD64 (SACD) |
| Digital USB Input Sample Rate | 32-bit/44.1kHz to 384kHz (PCM) || DSD64, DSD128, DSD256, DSD512, DXD352.8kHz, DXD384kHz |
|
CONTROL |
|
| Tone Controls | 5-Band |
| Tone Bypass and Input Assign | Yes |
| RS232 Control Input | Yes |
| Power Control Output | 1 Main, 2 Trigger |
| Rear Panel Data Port | 4 |
| Rear Panel IR Sensor Input | Yes |
|
GENERAL SPECIFICATIONS |
|
| Vacuum Tube or Solid State | Solid State |
| Output Type | Autoformer™ |
| Output Meters | Yes |
| Power Requirement | 120V 50/60Hz, 4.4 amps |
| Standby Power Requirement | <0.25 Watts |
|
WEIGHTS & DIMENSIONS |
|
| Unit Dimensions (W x H x D) | 17-1/2″ (44.5cm) x 7-5/8″ (19.4cm) x 18-3/4″ (47.6cm)Unit Weight:75 lbs (34.1 kg) |
| Shipping Weight | 93 lbs (42.3 kg) |
Description
MA8950 Integrated Amplifier
The MA8950 Integrated Amplifier offers 200 Watts per channel and combines McIntosh’s amplification expertise and preamplifier technologies into one comprehensive stereo sound system component. It replaces the award-winning MA8900 (Secrets of Home Theater and High Fidelity 2017 Best Stereo Integrated Amplifier) and adds additional performance enhancements to an already outstanding stereo integrated amplifier.
Dynamic headroom has increased from (2.0dB to 3.1dB) in the MA8950 as a result of its filter capacity being doubled. This gives the MA8950 even greater ability to reproduce musical peaks with less distortion. The increased filter capacity will also help deliver more amazing bass playback, low end performance, and overall bass control.
The MA8950 comes standard with the DA2 Digital Audio Module instead of the DA1 Digital Audio Module that came in the MA8900. The DA2 offers 7 digital inputs: 2 coaxial, 2 optical, 1 USB, 1 MCT, and 1 audio-only HDMI Audio Return Channel (ARC)1 connection. TVs with a compatible HDMI (ARC) output can be connected to the MA8950 to enjoy your TV’s sound like never before through your home music system. Popular multi-channel audio formats from Dolby® and DTS® are supported and will be expertly converted to 2-channel audio for proper playback. The MA8950 remote can control the TV’s power and volume when CEC communication is enabled in both the amplifier and the TV. The DA2 also features increased DSD playback support of up to DSD512 via the USB input.
The DA2 Digital Audio Module features seven digital audio inputs.
The DA2 is powered by an audiophile-grade, Quad Balanced, 8-channel, 32-bit Digital-to-Analog Converter (DAC) that has improvements in both dynamic range and total harmonic distortion compared to the DAC in the DA1. The coax and optical inputs in the DA2 can decode digital music up to 24-bit/192kHz for playback of high-resolution audio. The DA2 has a McIntosh exclusive MCT input that offers a secure DSD connection to any of our MCT series of SACD/CD Transports to deliver the best possible sound quality of the high-definition audio found on your SACDs. And with its modular design, it’s possible to someday replace the DA2 with a newer Digital Audio Module.
McIntosh Monogrammed Heatsink.
The MA8950 is one of many McIntosh products to receive Roon Tested designation from Roon Labs. As a Roon Tested partner, McIntosh has provided equipment to Roon for testing with a variety of different operating systems and computers, and shared information about its design and capabilities.
The MA8950 Integrated Amplifier offers a comprehensive set of analog and digital audio inputs.
With its vast selection of digital audio inputs, analog connectivity has not been overlooked on the MA8950. It comes with 1 balanced and 6 unbalanced stereo inputs plus 1 Moving Coil and 1 Moving Magnet phono inputs for your turntable(s). All inputs can be given custom names for user-friendly system control and configuration. The Moving Coil phono input comes with adjustable loading so you can fine tune the sound of your vinyl records. All unbalanced analog connectors are made from premium gold-plated solid brass for superior signal handling and grounding. All analog and digital inputs can be given custom names for user-friendly system control and configuration. For further flexibility in setting up your stereo system, the MA8950 includes an unbalanced fixed output and an unbalanced variable output that can be used to send the audio signal to a second power amplifier.
“An amplifier that can handle almost any partnering equipment and speaker and deliver outstanding performance and flexibility with all of it. This is how McIntosh makes hifi and the results are sensational… It delivers sparkling performance while offering enormous connectivity and user friendliness.” – (Sound Online)
The MA8950’s 200 Watts per channel are delivered by a pair of the famous McIntosh Autoformer™ and is enough power to properly drive virtually all loudspeakers. The unique design of the Autoformer guarantees your speakers will always receive the full 200 Watts regardless if they have 2, 4 or 8 Ohm impedance.
Five-band tone controls.
The entire unit is wrapped in the timeless McIntosh aesthetic with a black glass front panel with LED lighting, blue watt meters, control knobs, illuminated logo, aluminum end caps and a beautiful polished stainless steel chassis. Contact your local dealer to learn more.
The HDMI (ARC) input will only play audio from a compatible TV. It will not pass video to or from a TV, or play audio from any non-TV source.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Dolby is a registered trademark of Dolby Laboratories.
DTS, DTS-HD, the Symbol, & DTS or DTS-HD and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
Additional information
| Colour | Black |
|---|
Warranty
Backed with a 3-year McIntosh warranty
Delivery Info
Delivery Information
As a company our primary goal is to provide a seamless service that results in customer satisfaction. We aim to deliver within 3 working days. Unfortunately, there may be occasions where this time frame may not be met due to unforeseen circumstances; in this instance, we deliver product/s as soon as we can. All delivery charges are included within the prices quoted, unless otherwise specified.
All small items are usually delivered between 9am and 6pm, on a Monday to Friday, unless a Saturday delivery is requested. Follow My Parcel is an industry-changing innovation from DPD Local, which will give your customers unparalleled levels of information and peace of mind.Not only will your customers receive a one hour delivery timeslot, but they’ll now also be able to track the progress of their parcels on a map as our drivers make their way to the delivery addresses. Follow My Parcel will:
